SolarEdge SE Series User Manual

 SE25K SE27.6K SE30K SE33.3K Unit
Applicable to inverters with part
numbers
SEXXK-XXX0IXXXX 
Overvoltage category III 
Input
Maximum DC Power (Module STC) 37500 41400 45000 50000 W
Transformer-less Yes 
Maximum Input Voltage DC+ to DC- 1000 Vdc
Nominal Input Voltage DC+ to DC- 750 Vdc
Maximum Input Current 36.25 40 43.5 48.25 Adc
Maximum back-feed current 0 Adc
Reverse-Polarity Protection Yes 
Ground-fault Isolation Detection
167kΩ Sensitivity
(1)

Overvoltage Category II 
Maximum Inverter Efficiency 98.3 %
European Weighted Efficiency 98 %
Night-time Power Consumption < 4 W
(1)
Where permitted by local regulations
Technical Specifications - Three Phase Inverters for Europe &APAC for
220/380V, and 230/400V Grids 72
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX

SolarEdge SE Series Specifications

General

Efficiency	Up to 99%
Protection Rating	IP65
Communication	Ethernet, Wi-Fi (optional), RS485
Dimensions	Varies by model
Weight	Varies by model
Rated AC Power	Varies by model
Max. DC Power	Varies by model
Model	SE Series (e.g., SE3000H, SE5000H)
AC Output Power	Varies by model
MPPT Range	Varies by model
Operating Temperature	-25°C to 60°C
Warranty	12 years standard, extendable to 20 or 25 years