SolarEdge SE Series

 SE25K SE27.6K SE30K SE33.3K Unit
Applicable to inverters with part
numbers
SEXXK-XXX0IXXXX 
Additional Features
Supported Communication Interfaces
2 x RS485, Ethernet, Wi-Fi (requires an
optional antenna), Cellular (optional)

Inverter Commissioning
With the SetApp mobile application using
built-in Wi-Fi station for local connection

RS485 Surge Protection Optional 
Smart Energy Management Export Limitation 
Arc Fault Protection
Integrated, user configurable (according
to UL1699B)

Rapid Shutdown
Optional
(1)
(Automatic upon AC grid
disconnect)

AC, DC Surge Protection
Type II, field replaceable,
Integrated/Optional (model dependent)

Maximum Operating Altitude without
De-rating
2000 m
DC Safety Unit (optional)
2-pole Disconnection 1000V / 40A  1000V / 48.25A 
DC Fuses (model dependent) Optional, 25A A
Compliance UTE-C15-712-1 
Standard Compliance
Safety IEC-62109, AS3100 
Grid Connection Standards
(2)
VDE-AR-N-4105,AS-4777,EN50438, CEI-
021, VDE 0126-1-1,CEI-016, EN50549-
1,EN50549-2,VDE-AR-N-4110,TOR
Erzeuger Typ A,G99, G99(NI),VFR 2019

Emissions
IEC61000-6-2, IEC61000-6-3 Class A,
IEC61000-3-11, IEC61000-3-12

WEEE,RoHS Yes 
Installation Specifications
(1)
Inverter with rapid shutdown part number: SExxK-xxRxxxxxx
(2)
For all standards refer to the certifications category in
http://www.solaredge.com/groups/support/downloads.
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX
73 SE25K, SE27.6K, SE30K, SE33.3K