SolarEdge SE Series User Manual

 SE33.3K SE40K Unit
Applicable to inverters with
part numbers
SEXXK-XXX8IXXXX 
Input
Maximum DC Power (Module
STC)
50000 60000 W
Transformer-less Yes 
Maximum Input Voltage DC+
to DC-
1000 Vdc
Nominal Input Voltage DC+ to
DC-
850 Vdc
Maximum Input Current 40 48.25 Adc
Reverse-Polarity Protection Yes 
Ground-Fault Isolation
Detection
167kΩ Sensitivity
(1)

Overvoltage category II 
Maximum Inverter Efficiency 98.1 %
European Weighted Efficiency 98 %
Nighttime Power
Consumption
< 4 W
Additional Features   
Supported Communication
Interfaces
2 x RS485, Ethernet, Wi-Fi (requires an optional
antenna), Cellular (optional)
Inverter Commissioning
With the SetApp mobile application using built in Wi-Fi
access point for local connection
RS485 Surge Protection Optional 
Smart Energy Management Export Limitation 
Arc Fault Protection Integrated, User Configurable (According to UL1699B)
Rapid Shutdown
Optional
(2)
(Automatic upon AC Grid
Disconnect)

AC, DC Surge Protection
(model dependent)
Type II, field replaceable,
Integrated/Optional

Maximum Operating Altitude
Without De-rating
2000 m
DC Safety Unit (Optional)   
2-pole Disconnection 1000V / 40A 1000V / 48.25A 
(1)
Where permitted by local regulations
(2)
Inverter with rapid shutdown part number: SEXXK-xxRxxxxxxx
Technical Specifications - Three Phase Inverters for Europe &APAC for
220/380V, and 230/400V Grids 76
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX

SolarEdge SE Series Specifications

General

Efficiency	Up to 99%
Protection Rating	IP65
Communication	Ethernet, Wi-Fi (optional), RS485
Dimensions	Varies by model
Weight	Varies by model
Rated AC Power	Varies by model
Max. DC Power	Varies by model
Model	SE Series (e.g., SE3000H, SE5000H)
AC Output Power	Varies by model
MPPT Range	Varies by model
Operating Temperature	-25°C to 60°C
Warranty	12 years standard, extendable to 20 or 25 years