SolarEdge SE7600A-US - Installing the 9 V Battery and Fuses

Installing the 9VBattery and Fuses
A9Vbatteryissuppliedwiththeinverteraccessories.Installthe9Vbatteryintheholderonthetopboard
oftheConnectionUnitandconnectittothebatterypad.
Figure 18: The battery holder
Two25Afusesaresuppliedwiththehighpowerinverters.Installthefusesintheholdersonthetopboard
oftheConnectionUnit.
Figure 19: Connection Unit fuses
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
32
Installing the 9VBattery and Fuses