SolaX Power X1-BOOST-5K-G4 - Manual Scope, Audience, and Symbols; Safety Guidelines and EC Directives

1.1 Scope of Validity
1 Notes on this Manual
7 Troubleshooting
7.1 Troubleshooting
7.2 Routine Maintenance
8 Decommissioning
8.1 Dismantling the Inverter
8.2 Packaging
8.3 Storage and Transportation
8.4 Disposal of the inverter
Notes on this ManualContents
03
02
76
76
79
80
80
80
80
80
X1-BOOST-2.5K-G4
DANGER！
WARNING!
CAUTION!
“Caution” indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
NOTE!
* Warranty registration form
9 Disclaimer
81
This manual is an integral part of X1 Series. It describes the assembly,
installation, commissioning, maintenance and failure of the product.
Please read it carefully before operating.
Note: ”X1” : single phase; “BOOST”: BOOST series; “3K”: 3kW; “G4": the
4th generation
Keep this manual at where is accessible all the time.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this
manual can only be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear
in this document are shown as below:
“Danger” indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
“Warning” indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
“Note” provides tips that are valuable for the optimal
operation of your product.
6.3 LCD Operation
50
X1-BOOST-3K-G4 X1-BOOST-3.3K-G4
X1-BOOST-3.6K-G4
X1-BOOST-4.2K-G4
X1-BOOST-5K-G4
X1-BOOST-6K-G4