Available Space Size
Position Min.size
Left
300 mm
300 mm
300 mm
300 mm
300 mm
Right
Top
Bottom
Front
Table Available Space Size
18
Installation Installation
19
≥300 mm ≥300 mm
≥300 mm
≥300 mm
Step 1: Screw the wall bracket on the wall
a) Use the wall bracket as a template to mark the position of the 3 holes on
the wall using a marker, and adjust it even using the spirit level.
Ø
≥300 mm
NOTE!
Avoid installing in the confined space.
5.4 Installation Steps
Preparation
Tools below are needed before installation.
Ø
Drill
Multimeter
Measuring tape
Mallet
Marker
Cross screwdriver
Wire stripper
Crimping tool
Torque wrench
(10 mm)
Hot-air blower
MC4 crimping tool
Diagonal pliers
Spirit level
Crimping tool
for RJ45
Heat shrinking
tube (5 mm)
Allen key (4 mm)
Safety goggles
Anti-dust mask
Safety gloves Safety boots
To Next Page
Loading...
