16 • Mode Pages Display
________________________________________________________________________________________________
Press SELECT
Fault occurs when the TPR-6 detects three consecutive transmissions from the host computer, in which a
parity bit, and/or the CRC word are wrong. Enabling, Disabling trip function upon communication failure.
Press ▲ or▼ keys to set this function.
Range: DISABLE, ENABLE
Press Select to see Alarm, AUTO RST, RELAY A..RELAY D settings for COMM PORT FAILED.
Press SELECT
Enabling, Disabling trip function upon INTERNAL FAILURE in the TPR
Press ▲ or▼ keys to set this function.
Range: DISABLE, ENABLE
Press Select to see Alarm, AUTO RST, RELAY A..RELAY D settings for COMM PORT FAILED.
Press PAGE. The display will change to the next page: ACTUAL DATA.
To Next Page