17 • Mode Pages Display
________________________________________________________________________________________________
6.4 Actual Data
The following demonstrates the readings with the following settings in TEMPERATURE SETTINGS:
T1 SENSOR TYPE is set to RTD
T2 SENSOR TYPE is set to PTC THERMISTOR
T3 SENSOR TYPE is set to PTC THERMISTOR
Press SELECT
In case sensors are not connected the LCD will show FAILED SENSOR ??
Press SELECT
In case sensors are not connected the LCD will show FAILED SENSOR ??
Press SELECT
In case sensors are not connected the LCD will show FAILED SENSOR ??
Press PAGE. The display will change to the next page: STATISTICAL DATA.
To Next Page
Loading...