INTRODUCTION
Thank you for selecting the TBZ/TBZE Series Solidpump
Submersible General Dewatering Pump.
This manual explains how to use this equipment and give
instructions on precautions to take during the use. In order to
understand the features of the TBZ/TBZE Series and to use it in
the most effective manner, read this manual before using the
pump.
This equipment should not be used for applications other than
those listed in this manual. In the event of a malfunction or an
accident, the manufacturer will not assume any liability. We
recommend that after you read this manual, you keep it on hand
so that you may be able to refer to it later.
In case you lend this equipment to someone, be sure to also
lend this manual together with the equipment.
In case this manual is lost or damaged, contact with the dealer
from whom you purchased the equipment or the Solidpump
Europe SIA sales office in your area.
This manual was prepared with the utmost attention to details.
However, if you find any errors or omissions, contact with the
dealer from whom you purchased the equipment or the
Solidpump Europe SIA sales office in your area.
The contents of this manual may not be copied, in whole or
part, without consent of Solidpump Europe SIA.
Contents
1.Introduction
1
Safety terminology and symbols 1
Pr oduct wa rrant y 2
S a f e t y 3
User s a f e t y 3
E nvi ronm ental s afe ty 4
2.Product description
4
Pu m p design 4
In t ended us e 5
T he data p la te 5
Pu m p par t nam e s 6
TBZE technical data and function 7
3.Prior to use
8
Inspect the product 8
Inspect the specification 8
Product specification 8
Method of starting 8
4.Installation
9
Preparation for installation 1 0
Inst all t he pump 1 0
Make the electrical connections 1 2
G roundin g 1 3
C onnecting the cables 1 3
5.Operation
1 5
Be f o re operat i o n 1 5
Tr i a l oper ati o n
1 6
O per a t i o n
1 7
Mo t o r
pro te ction
syste m
1 8
Wate r level during operation
1 9
6.Maintenance and inspection
20
Inspecti o n
2 0
S t o r age
2 1
M a i n t enance
2 1
Disassembly and reassembly procedure 2 2
7 .Tr ouble s hoot ing
2 5
To Next Page
Loading...