1. Introduction
Purpose of this manual
The purpose of this manual is to provide necessary information for:
Installation
Operation
CAUTION:
Read this manual carefully before installing and using the product.
Improper use of the product can cause personal injury and damage
to property and may void the warranty.
NOTICE:
Save this manual for future reference, and keep it readily
available at the location of the unit.
(1) Safety terminology and symbols
About safety messages
It is extremely important that you read, understand, and follow the safety messages
and regulations carefully before handling the product. They are published to help prevent
these hazards:
Personal accidents and health problems
Damage to the product
Product malfunction
Hazard levels
DANGER:
A hazardous situation which, if not avoided, will result in
death or serious injury
WARNING:
A hazardous situation which, if not avoided, could result in
death or serious injury
CAUTION:
A hazardous situation which, if not avoided, could result in
minor or moderate injury
NOTICE:
A potential situation which, if not avoided, could
result in undesirable conditions
A practice not related to personal injury
Hazard categories
Hazard categories can either fall under hazard levels or let specific symbols
replace the ordinary hazard level symbols. Electrical hazards are indicated by
the following specific symbol:
Electrical hazard:
These are examples of other categories that can occur, They fall under the
ordinary hazard levels and may use complementing symbols:
Crush hazard
Cutting hazard
(2) Product warranty
Coverage
Solidpump undertakes to remedy the following faults in products sold by Solidpump under
the following conditions:
The faults are due to defects in design, materials or workmanship.
The faults are reported to a Solidpump representative within the warranty period.
The product is used only under the conditions described in this manual.
The monitoring equipment incorporated in the product is correctly connected and in use.
All service and repair work is done by personnel authorized by Solidpump.
Genuine Solidpump parts are used.
Limitations
The warranty does not cover faults caused by the following:
Deficient maintenance
Improper installation
Modifications or changes to the product and installation carried out without consulting
Solidpump
Incorrectly executed repair work
Normal wear and tear
Solidpump assumes no liability for the following:
Bodily injuries
Material damages
Economic losses
Warranty claim
Solidpump products are high-quality products with expected reliable operation and long life.
However, should the need arise for a warranty claim; please contact your Solidpump
representative.
Spare parts
Solidpump guarantees that spare parts will be available for 10 years after the manufacture
of this product has been discontinued.
NOTICE:
When purchasing pump parts please provide product code showed at the nameplate.
1 2
To Next Page
Loading...