To Next PageTo Next PageWhy is my SOLIS S6-GR1P6K showing NO-Battery error?
If your SOLIS Inverter is showing a NO-Battery error, check the battery voltage. First, verify the battery voltage is within the specified standards on page 1 of the information display. Also, measure the battery voltage at the plug.
What to do if SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000)?
If your SOLIS Inverter displays 12Power-FAULT (1038 DATA:0000), check for current leakage to ground. Verify your grounding and ensure all wires are in good condition and not leaking current to ground.
What does ARC- FAULT (1041 DATA:0000) mean on SOLIS Inverter and how to fix it?
The ARC- FAULT (1041 DATA:0000) error on your SOLIS Inverter indicates a potential arc fault. Start by verifying that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
Why is my SOLIS S6-GR1P6K showing OV-DC01 (1020 DATA:0001)?
The OV-DC01 (1020 DATA:0001) error on your SOLIS Inverter indicates a potential issue with the PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system to confirm that the fault continues.
What does 12Power-FAULT mean on SOLIS S6-GR1P6K Inverter?
If your SOLIS Inverter displays '12Power-FAULT (1038 DATA:0000)', check for current leakage to ground, verify your grounding, and ensure all wires are in good condition and not leaking current to ground.
What does OV-TEM (1032 DATA:0000) mean on SOLIS S6-GR1P6K?
The OV-TEM (1032 DATA:0000) error on your SOLIS Inverter suggests a temperature-related issue. Check the surrounding environment to ensure the inverter has proper heat dissipation. Also, confirm that the product installation meets the specified requirements.
What to do if SOLIS S6-GR1P6K Inverter displays DCInj-FAULT (1037 DATA:0000)?
If your SOLIS Inverter shows a DCInj-FAULT (1037 DATA:0000) error, it could indicate an issue with the grid or AC cable connection. First, confirm that the grid is not abnormal. Next, ensure the AC cable connection is secure. If the problem persists, restart the system to see if the fault continues.
What does LmtByEPM mean on my SOLIS S6-GR1P6K and how to fix it?
The 'LmtByEPM' message on your SOLIS Inverter indicates a power limitation issue. Confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device or whether the power setting of the inverter power control is limited.
Why is my SOLIS Inverter showing OV-G-V01 error?
The OV-G-V01 error on your SOLIS Inverter could be due to an abnormal power grid or an improperly connected AC cable. First, check if the power grid is working correctly. Next, ensure the AC cable is properly connected. If the issue continues, restart the system to see if the fault clears.
What to do if my SOLIS S6-GR1P6K Inverter shows a Surge Alarm?
If your SOLIS Inverter displays a Surge Alarm, there may be a grid side fault. Restart the device. If the alarm persists after restarting, contact the manufacturer's customer service for assistance.
General| Model | S6-GR1P6K |
|---|---|
| Rated Output Power | 6000 W |
| Max. Input Voltage | 600 V |
| Start-up Voltage | 90 V |
| Number of MPPT Trackers | 2 |
| MPPT Efficiency | 99.9% |
| Nominal AC Output Power | 6000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Cooling Method | Natural convection |
| Max. DC Input Power | 9000 W |
| Max. AC Apparent Power | 6000 VA |
| Operating Temperature Range | -25°C to 60°C |
| Type | Single-phase inverter |
