10
Series 75FRN2: 75FRN2, 75FRN2-L, 75FRN2-R, 75FRN2-RL
1-2 Mainboard Specifications
1-2.1 CPU Socket
CPU Socket 462 (Socket A) on board, supporting AMD Athlon, Athlon
XP and Duron processors and implementing 400/333/266/200MHz sys-
tem bus
1-2.2 System Chipsets
• North Bridge nVIDIA nFORCE2 Ultra 400 (nFORCE2 SPP) for
managing and supporting 400/333/266/200MHz system Bus, AGP
8X/4X interface and DDR 333/266MHz Memory Interface with an
enhanced support of DDR 400MHz Memory Module.
• South Bridge nVIDIA nFORCE2 MCP working with North Bridge
nFORCE2 SPP supporting the HyperTransport, LPC Super I/O, PCI
interface, ATA133 interface, LAN interface, USB V2.0 interface as
well as AC’97 Audio 6-channel interface.
1-2.3 Memory
3 DDR DIMM 184-pin slots on board :
• Supporting unregistered, non-ECC Dual-channel DDR 400/333/266/
200 SDRAM up to 3GB
• Supporting installation of identical DDR SDRAM modules for Dual
Channel transfer.
1-2.4 BIOS
Flash Memory for easy upgrade, supporting BIOS Writing Protection,
Year 2000 compliant, and supporting various hardware configuration
during booting system (See Chapter 4 BIOS Setup):
• Standard CMOS Features (Times, Date, Hard Disk Type etc,)
• Advanced BIOS Features (Virus Protection, Boot Sequence etc.)
• Advanced Chipset Features (AT Clock, DRAM Timing etc.)
• Power Management Features (Sleep timer, Suspend Timer etc.)
• PNP/PCI Configurations (IRQ Settings, Latency Timers etc.)
• Integrated Peripherals (Onboard I/O, IRQ, DMA Assign. etc.)
• SmartDoc Anti-Burn Shield (CPU/System Temp., Fan speed etc.)
• CPU Ratio/Voltage Control (Voltage of CPU, DIMM, AGP etc.)
To Next Page
Loading...
