EasyManua.ls Logo

SOLTEK 75FRN2 Series - Installing Drivers; 5-2.1 for Windows 2000;XP

SOLTEK 75FRN2 Series
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Series 75FRN2: 75FRN2, 75FRN2-L, 75FRN2-R, 75FRN2-RL
90
5-2 Installing Drivers
This section details the PDC 20376 FastTrak 376 driver installation for
various operating systems. The driver should have been included ei-
ther into the Support CD or into a Support Floppy Diskette.
Checkpoints for the driver installation:
1. To install FastTrak 376 Driver for an operating system, you must use
the driver in Floppy Diskette instead of the one in CD. If you are not
provided with a Driver Diskette, you should create one by copying
the driver files through the support CD with the path:
“E \Driver\Promise\FastTrak 376. (Suppose that CD-ROM Drive is E).
2. The following sections describe the detailed procedures of installing
FastTrak 100-Lite Driver for windows 2000, Windows 95/98, Win-
dows NT4.0, and Windows 3.1 / DOS.
5-2.1 For Windows 2000/XP
5-2.1-1 Installing Driver During New Installation of Windows
2000 / XP
1. Connect your hard driver(s) for RAID Array to IDE3/ATA1/ATA2, and
enable FastTrak 376 Controller by Jp4.
1a. Bootable floppy: Boot from bootable floppy and type “WINNT”.
After files have been copied, the system will reboot. On the reboot,
press <F6> after the message “Setup is inspecting your computer’s
hardware configuration... ”appears.
1b. CD-ROM Install: Boot from the Windows 2000 / XP CD. Press <F6>
after
the message “ Press F6 if you need to install third party SCSI or RAID
driver” appears.
2. When the “Windows 2000/ XP Setup” window is generated, Press
“S”
to specify an Additional Device(s).
3. Press “O” to select “Other” and press the “Enter” key.
4. Insert into drive A the Promise Technology ® RAID driver diskette
(you can make one yourself from your Support CD if you cannot
find one in the Mainboard Package) and press “Enter” key.
5. Choose “Win2000/ XP Promise FastTrak 376 Controller” from the
list that appears on screen, then press the “Enter” key.
6. The Windows 2000/XP Setup screen will appear again saying “Setup
will
load support for the following mass storage devices:” The list will include
“Win2000/XP Promise FastTrak 376 controller”.

Table of Contents

Related product manuals