Somark LABSTAMP - Selecting ID Method; Entering ID

13 Procedure | Labstamp User Guide | PN: 1202.D
Figure 3-16 Entering the ID
3.10. SELECTING THE ID METHOD / ENTERING THE ID
There are two options for selecting the ID to be applied:

Manual entry

Auto increment.
3.10.1 Option 1: Manual Entry
3.10.1.1 Using the Applicator Machine keypad, enter the desired alpha/numeric
ID combination from 0-999 and/or A-Z. A space and plus/positive (+) or minus/negative
(-) are also available.
3.10.2 Option 2: Auto Increment
3.10.2.1 Press the AUTO INCREMENT button. The button light will illuminate.
3.10.2.2 Enter the first ID in your desired sequence. Beginning with the number that you
entered, the subsequent tattoos that are applied will increase according to the rules
below.
Auto increment sequence rules
 Alpha/Numeric sequences will increase by 1 from 0-999 or A-Z. You may start with any alpha/numeric
character.
If the first ID is… the next ID will be … & the final ID will be …
9 _ _ 1 0 _ 9 9 9
_ _ 9 _ 1 0 9 9 9
A 9 _ B 0 _ Z 9 _
_ A 9 _ B 0 _ Z 9
A 0 9 A 1 0 Z 9 9
1 Z _ 2 A _ 0 Z _
_ 1 Z _ 2 A _ 0 Z
0 1 Z 0 2 A 9 9 Z
A 0 Z 1 B 0 9 Z 9
Z _ _ A A _ Z Z Z
_ _ Z _ A A Z Z Z