SOMFY Clever - Motor and Adaptor Assembly

EN
11
2h. Insert the matching tilt rod adaptor into the motor (the one you set aside in Step 2b). NOTE: Insert the tilt rod adaptor into the side of the
motor with the grooved opening.
Tilt rod adaptor
Somfy Clever motor
2i. Attach the two headrail adaptors to the motor (the pair you set aside in Step 2a). Feed the motor wires through the gap in the adaptor.
NOTE: Attach the headrail adaptors in the same orientation as shown, fitting each securely onto the connector points on the motor.
Wires should pass through headrail adaptor as shown.
Make sure wires are not pinched.
Somfy Clever motor
Headrail adaptor
Headrail adaptor