Sonel MIC-2 - 3 Software Version and Design Display; 4 Power Supply of the Meter; Monitoring of the Power Supply Voltage

OPERATING MANUAL MIC-2 ver. 1.8
10
3 Software version and design
display
4 Power supply of the meter
4.1 Monitoring of the power
supply voltage
After the meter is turned on, the level of batter-
ies or accumulators (rechargeable batteries) is dis-
played for 2 seconds (100%, 75%, 50%, and 25%).
Additional information displayed by the
meter
flashing
The charge of the batteries (ac-
cumulators) is below 25%.
constant
The charge of the batteries (ac-
cumulators) precludes measure-
ments, except for measurements
of the voltage.