Sonel MIC-2 - Auxiliary Data; 9 Accessories; Standard Accessories

OPERATING MANUAL MIC-2 ver. 1.8
14
i) Power supply of the meter: batteries 1.5V
(AAA) or accumulators (rechargeable batter-
ies) Ni-MH 1.2V (AAA) - 2 pieces
j) Number of measurements R
ISO
: > 500
k) Dimensions: approximately 240x60x30 mm
l) Mass of the meter with the batteries: approxi-
mately 0.3kg
m) Working temperature: 0..+40C
n) Humidity: 20...90%
o) Reference temperature: 23 ± 2C
p) Reference humidity: 40...60%
q) Storage temperature: -20C..+70C
r) Altitude (above sea level): <2000 m
s) Time before auto-off: 5 minutes
t) Electromagnetic compatibility: compliance with
EN 61000-6-3 and EN 61000-6-2
u) Quality standard: development, design and
manufacture in accordance with ISO 9001
8.2 Auxiliary data
Additional uncertainty in accordance with IEC
61557-5:
Operating
uncertainty
or influential
value
Reference
conditions
or range of
application
Symbols
Additional
uncertainty
Position
Reference
position
±90°
E
1
0
Power sup-
ply voltage
U
nom
÷ U
min
E
2
0
Temperature
0 ÷ 35°C
E
3
6%
Working un-
certainty


2
3
2
2
2
1
15,1 EEEAB 
where A = Intrinsic uncertainty
9 Accessories
9.1 Standard accessories
The standard set provided by the manufacturer
includes the following components:
 MIC-2 measuring instrument with an integrated
1.2m black lead with a banana plug,
 batteries 1.5V AAA (2 pieces),
 Pin probe with banana connector, black (1
piece),
 Crocodile clip K01, black (1 piece),
 Blister,
 Operating manual,
 Calibration certificate.