Product Guide
8
Change the surround settings
The default settings are determined by the calibration process. You can tweak them to suit your preferences.
1. Ta p > Settings > Room Settings.
2. Choose the room with the home theater speakers—the room name has (+LS+RS) in it.
3. Select Advanced Audio > Surround Settings.
4. Choose one of the following:
• Surrounds: Choose On or Off to turn the sound from the surround speakers on and off.
• TV Level: Drag your finger across the slider to increase or decrease the volume of the surround speakers
for playing TV audio.
• Music Level: Drag your finger across the slider to increase or decrease the volume of the surround
speakers for playing music.
• Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range
sound). This setting applies only to music playback, not TV audio.
• Balance Surround Speakers (iOS): Select Balance Surround Speakers and follow the prompts to
manually balance your surround speaker levels.
On a Mac or PC
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room with the home theater speaker from the Room Settings drop-down list.
4. From the Basic tab, select Add Surround Speakers.
5. Follow the prompts to add first a left and then a right surround speaker.
Remove surround speakers
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the surrounds speakers are in from the Room Settings drop-down list. The room name
appears as Room (+LS+RS).
4. From the Basic tab, click Remove Surrounds. If these were newly purchased speakers, they will appear
as Unused in the Rooms pane. If these speakers existed in your household previously, they revert back to
their previous use.
Change the surround settings
The default setting is determined by the calibration process. If you want to make a change, you can follow the
steps below.
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the surrounds speakers are in from the Room Settings drop-down.
4. Select the Surrounds tab.
5. Choose one of the following:
• Surrounds: Check to turn the sound from the surround speakers on; uncheck to turn it off.
• TV Level: Click and drag the slider to increase or decrease the volume of the surround speakers for
playing TV audio.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
