Product Guide
4
Back
Next track
Previous track
Swipe left to right between the touch controls to get to the next track;
swipe right to left to hear the previous track.
When placed vertically, swipe down to go to the next track.
(Next/Previous touch controls don’t work when you’re listening to a
radio station.)
IR (InfraRed) Sensors / Signal Lights The IR sensor receives the signals sent by a remote control.
When the PLAYBASE receives a volume or mute command, the IR
signal light displays momentarily. If desired, you can adjust this setting
so the light never displays. See “IR signal light” for more information.
Ethernet Ports (2) You can use an Ethernet cable to connect the PLAYBASE to your home
network.
Digital Audio In (Optical) Use an audio optical cable (supplied) to connect the Sonos
PLAYBASE’s digital audio input to the optical digital output on your
television. Take care not to bend or twist the cable.
The PLAYBASE’s digital audio in
and the optical cable end are ’D-
shaped’—be sure to align for proper
insertion.