Sonos PLAYBASE
7
b. Add the PLAYBASE to your Sonos system by selecting Add a Player or SUB from the Settings menu
on a handheld controller.
c. Add any additional Sonos products you purchased.
You may be prompted to update the new Sonos product(s) after you add them to your Sonos system.
Thick walls, 2.4 GHz cordless telephones, or the presence of other wireless devices can interfere with or
block the wireless network signals from your Sonos system. If you experience difficulty after positioning a
Sonos product, try one or more of the following resolutions—relocate the Sonos product; change the
wireless channel your music system is operating on; connect a Sonos product to your router if your setup
is currently wireless.
If you’d like additional assistance:
• If you need help turning off your TV speakers, see page 20 for more information.
• If you need help configuring a remote control to work with your PLAYBASE, see page 7 for more
information.
• If a message appears on the TV whenever you adjust the volume up and down, it may be possible to
eliminate it. If you are using a cable remote, see
page 18. If you are using a universal remote, see page
19 for additional help.
• If you want to play music through the PLAYBASE, see page 16 for more information.
PLAYBASE Settings
Follow the steps below if you wish to make changes to any PLAYBASE settings or the way the PLAYBASE
works with your television.
•Remote Control Setup
• Equalization
• Recalibrating the Audio
• TV Dialog Settings
• Speech Enhancement
• Night Sound
•TV Autoplay
•IR Signal Light
• IR Repeater
• White Indicator Light
• Room Name
• Add SUB / Remove SUB (if SUB is present)
• Add / Remove Surround Speakers (if surround speakers are present)
Setting Up a remote control
During PLAYBASE setup, you were guided through the process of configuring a remote control. If you did not
configure one then, or wish to use a different remote control with your PLAYBASE, follow the steps below.
If you are configuring a new remote because a distracting message appears on the television whenever you
adjust the volume, please go to
“Eliminating annoying messages on your TV when using a cable, satellite, or
set top box remote”, or “Eliminating annoying messages on your TV when using a universal remote” for
additional information.