Sonos PLAYBASE
11
3. Choose the room the PLAYBASE is located in from the Room Settings drop-down list. The room name
appears as Room (+LS+RS).
4. From the Basic tab, click Remove Surrounds. If these were newly purchased speakers, they will appear
as Unused in the Rooms pane. If these speakers existed in your household previously, they revert back to
their previous state.
Change the surround settings
The default setting is determined by the calibration process. If you wish to make a change, you can follow the
steps below.
If you’re using a mobile device
1. From the Settings menu, tap Room Settings.
2. Select the room the PLAYBASE and surround speakers are located in. It appears as Room (+LS+RS) on
the Room Settings menu.
3. Ta p Advanced Audio -> Surround Settings.
4. Choose one of the following:
• Surrounds: Choose On or Off to turn the sound from the surround speakers on and off.
• TV Level: Drag your finger across the slider to increase or decrease the volume of the surround speakers
for playing TV audio.
• Music Level: Drag your finger across the slider to increase or decrease the volume of the surround
speakers for playing music.
• Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range
sound). This setting applies only to music playback, not TV audio.
• Balance Surround Speakers (iOS): Select Balance Surround Speakers and follow the prompts to
manually balance your surround speaker levels.
If you’re using a computer
1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room the PLAYBASE and surround speakers are located in from the Room Settings drop-
down.
4. Select the Surrounds tab.
5. Choose one of the following:
• Surrounds: Check to turn the sound from the surround speakers on; uncheck to turn it off.
• TV Level: Click and drag the slider to increase or decrease the volume of the surround speakers for
playing TV audio.
• Music Level: Click and drag the slider to increase or decrease the volume of the surround speakers for
playing music.
• Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range
sound). This setting applies only to music playback, not TV audio.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
