Sonos PLAYBASE User Manual

Product Guide
4
PLAYBASE Back
Ethernet Port You can use an Ethernet cable to connect the PLAYBASE to your home
network. You should only use this port to plug in either the PLAYBASE
or a Sonos BRIDGE or BOOST.
Digital Audio In (Optical) Use an audio optical cable (supplied) to connect the Sonos
PLAYBASE’s digital audio input to the optical digital output on your
television.
• Take care not to bend or twist the cable.
• Align the ‘D-shaped’ ends for proper insertion.
AC Power (Mains) Input Use only the supplied power cord to connect to a power outlet (using a
third party power cord will void your warranty). Push the power cord
firmly into the PLAYBASE until it is flush with the surface.
Join button Press the round Join button on the side of the unit to connect the
PLAYBASE to Sonos.

Sonos PLAYBASE Specifications

General

Control type	Touch
Volume control	Digital
Smartphone remote support	Yes
Internet radio services supported	Napster, Pandora, Slacker, Spotify, TuneIn, iTunes
Network streaming services supported	-
Product color	White
Number of drivers	10
Number of woofer drivers	1
Number of tweeter drivers	3
Number of mid-range drivers	6
USB port	No
Wi-Fi standards	802.11b, 802.11g
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Cables included	AC, LAN (RJ-45), Optical

Weight and Dimensions

Depth	380 mm
Width	720 mm
Height	58 mm
Weight	8600 g