17
Instruction for Use | HCA 56x and 8x8
Position 1: Specific Branding, Customer or Sonex Logo:
If technical options allow it, it is possible to stamp or laser-engrave a specific logo on the
front face of the allocator's housing.
Position 2: Allocator Date and Standard Time:
The UTC time zone will be programmed in accordance with the country where the allocator
is installed.
Position 3: Set Day (yearly date):
It is possible to program an annual set day on which the cumulative consumption value to
date is recorded.
Position 4: Setting Winter / Summer Periods:
2 options: yes / no.
If the 'yes' option is chosen, two different specific heating periods (winter and summer) with
different start temperatures settings depending on the current period can be distinguished.
Position 5: Set the Start of the Summer Period:
Choose the date on which the summer period will begin.
Position 6: Set the Start of the Winter Period:
Choose the date on which the winter period or the heating period will begin.
Example of a setting sheet for Sontex 868 :
To Next Page
Loading...
