Sontex 56 Series User Manual

3
Instruction for Use | HCA 56x and 8x8
Table of Contents
1. Note on this Document 7
1.1 Scope 7
1.2 Audience 7
1.3 Accessibility of the Document 7
1.4 Further Information 7
1.5 Symbols 8
2. Safety 9
2.1 Personnel Qualification 9
2.2 Intended Use 9
2.3 Safety Instructions 10
2.3.1 Occupational Safety 10
2.3.2 Operational Safety 10
2.3.3 Product Safety 10
2.4 Hazard and Disposal 10
2.4.1 Changing the Battery 10
2.4.2 Installation with Glue 11
2.5 Disposal 11
2.6 Warranty 11
2.6.1 Compliant Use 11
2.6.2 Non-compliant Use 11
2.7 Notes regarding Installation 11
2.8 Protection against Outside Influences 11
2.8.1 Lead Seal 11
2.8.2 Electronic Detection of Opening 12
2.8.3 Data Collection while the Device is open 12
2.9 Transport and Packaging 12
2.10 New Programming 12
2.11 Restrictions 12
2.11.1 Not permited Uses 12
2.11.2 Measurement using Single or Dual Sensors 12
2.11.3 Exclusion of Liability 12
3. Product Description 13
3.1 Packaging 13
3.2 Type 13
3.3 Design 13
3.4 Dimension and Description 13
3.5 Characteristics 14
3.6 Display 14
3.7 Electronic 14
3.8 Versions 14
3.9 Optical Interface 15
3.10 Radio Sontex (Sontex 566) 15
3.11 Radio wM-Bus (Sontex 868) 15
3.12 Radio LoRaWAN® (Sontex 878) 15
4. Settings 16
4.1 Article Coding System 16
4.2 Settings 16
5. Operating Mode 20
5.1 Cycle 20
5.2 Single Sensor with Start Sensor 20
5.3 Dual Sensor Version 20
5.3.1 Heat Accumulation Mode 21

Sontex 56 Series Specifications

General

Brand	Sontex
Model	56 Series
Category	Measuring Instruments
Language	English