Sontex 56 Series User Manual

19
Instruction for Use | HCA 56x and 8x8
2 options: Automatic commissioning upon installation on the back plate / By pressing the
push button after installation on the back plate.
The allocator leaves the factory in sleep mode, meaning that it does not measure or
calculate consumption. The transition from sleep to installation mode can be carried out in
2 different ways: automatically upon installation on the aluminium back plate or by pressing
the push button after having installed it on the aluminium back plate.

Position 22: 24-hour Active Display:
2 options: yes / no.
If the 'no' option is chosen, the display will always be switched off. By pressing the push
button, the LCD screen will become active. After 3 minutes of inactivity, the screen will
automatically return to deactivated mode.
If the 'yes' option is chosen, the display will be active 24 hours a day.

Position 23: Scrolling Display Menu:
2 options: yes / no.
If the 'no' option is chosen (static display), the menu can be changed by pressing the push
button.
If the 'yes' option is chosen, the display will automatically move from one menu to the next.
The display duration can be configured individually for each duration.

Position 24: Error Information Display:
If an error occurs, the Err message will appear on the LCD screen. This information will
appear at the top of the menu sequence.

Positions 25 to 39: 15 values which can be displayed.

Position 40: Programmable Display Time for Each Value Shown.

Position 41: Operation Mode for the Wireless M-Bus Radio:
2 options: short telegram (OMS) / long telegram (Walk-by).

Position 42: Transmission Interval for Wireless M-Bus Radio Telegram:
Set a transmission interval for sending Wireless M-Bus radio telegrams.

Position 43: Wireless M-Bus Radio Telegram Transmission Period.
Short telegram (OMS): 24 hours a day, 7 days a week.
Long telegram (walk-by): 12 hours chosen per day (programmable), 7 days a week.

Position 44: AES-128 Encryption Activated at Factory:
2 options: yes / no.
If the 'yes' option is chosen, the encryption key can be programmed according at the
customer's request.

Position 45: Decryption Key:
This may be chosen by the customer.

Position 46: Installer Password:
Default password: 00001234
This may be chosen by the customer.

Position 47: Detachable Label Attached to the Heat Cost Allocator:
2 options: yes / no.
If the 'yes' option is chosen, a detachable label will be attached to the front face of the
allocator.

Position 48: Information Contained on the Detachable Label:
The information contained on the detachable label may be chosen by the client.

Position 50 : LoRa Join EUI

Position 51 : LoRa Transmission interval (SF7):
Default value 60 minutes / configurable from 30-540 minutes

Position 52 : LoRa Transmission interval (SF8):
Default value 60 minutes / configurable from 30-540 minutes

Position 53 : LoRa Transmission interval (SF9):
Default value 60 minutes / configurable from 60-540 minutes

Position 54 : LoRa Transmission interval (SF10):
Default value 120 minutes / configurable from 60-540 minutes

Position 55 : LoRa Transmission interval (SF11):
Default value 120 minutes / configurable from 120-540 minutes

Sontex 56 Series Specifications

General

Brand	Sontex
Model	56 Series
Category	Measuring Instruments
Language	English