(A) Voice function LED (On the left side at the bottom of the TV. Only TVs with a built-in MIC. )
(B) Operational response LED (In the centre at the bottom of the TV.)
The built-in MIC on the TV may not be available depending on your region/model/language.
Voice function LED
Turns “on” or “blinks” when “Ok Google” is detected and the TV is communicating with the
server. The lighting pattern of this LED depends on the server communication status.
Note
After you press the MIC/Google Assistant button on the remote control and finish
activating the built-in MIC on the TV, the voice function LED turns on in pale yellow when
the built-in MIC on the TV is off (when on, the Operational response LED turns on in
amber). However, the lighting pattern of the LED may change depending on the
settings.
The colour of the voice function LED may vary due to specification changes.
Operational response LED
Turns “on” or “blinks” in white when the TV is turning on, when receiving signals from the
remote control, or when updating the software using a USB storage device.
When ["Ok Google" detection] is enabled, it turns “on” in amber. (only TVs with a built-in MIC )
The built-in MIC may not be available depending on your region/model/language.
When the Built-in MIC switch is on, it turns “on” in amber (only TVs with a built-in MIC ).
However, the LED may not turn on depending on the settings.
The built-in MIC may not be available depending on your region/model/language.
To use the built-in MIC, you may need to update the TV's software.
Related topics
*
*
*
*
*
*
To Next Page
Loading...
