To use the built-in MIC, you may need to update the TV's software.
Check if the Built-in MIC Switch is on. The voice recognition performance of the built-in MIC
may also degrade in the following cases.
When eARC features are enabled
When a sound bar is connected
When [Digital audio output] is set to [Prioritise pass through]
[130] Sound | Sound
The TV responds to sound from the surroundings
(only TVs with a built-in MIC).
To use the built-in MIC, you may need to update the TV's software.
The TV's built-in MIC may pick up sound from the surroundings and respond unintentionally.
Change the sensitivity of the TV's built-in MIC to [Medium] or [Low].
Press the (Quick Settings) button on the remote control, and select the following in order.
[Settings] — [System] — [Built-in MIC sensitivity]
[131] Troubleshooting
Network (Internet/home)/apps
The TV cannot connect to the Internet/Network.
You can connect to the Internet, but not to certain apps and services.
[132] Network (Internet/home)/apps | Network (Internet/home)/apps
The TV cannot connect to the Internet/Network.
If the wireless network does not connect or disconnects, try the following.
Press the (Quick Settings) button on the remote control and check that the following
setting is enabled.
[Settings] — [Network and Internet] — [Wi-Fi]
Check the installation location of the TV and wireless router. Signal condition may be
affected by the following:
Other wireless devices, microwaves, fluorescent lights, etc., are placed nearby.
There are floors or walls between the wireless router and TV.
To Next Page
Loading...
