Sony A95L - Page 14

1
1
2
3
4
Press the (Input select) button repeatedly to select the connected device.
Alternatively, press the (Input select) button, use the (Left) / (Right)
buttons to select a connected device, and then press the (Enter) button.
Note
If there are no devices connected to an HDMI input, the HDMI input may not be
displayed in the [Inputs].
To edit the input items
Press the (Input select) button.
Press the (Right) button (or (Left) button depending on the TV's display
language) and select (Edit).
Select the app/input/device you want to show or hide.
Select [Close].
Hint
To change the order or hide a displayed item, press the (Up) button on the remote
control with that item highlighted, and [Move] and [Hide] will be displayed. If you select
[Move], use (Left) / (Right) on the remote control to move the item to the desired
position, and then press the (Enter) button on the remote control.
You can switch to TV broadcasting by simply pressing the TV button on the remote
control.
[7] Getting Started
Performing acoustic auto calibration
You can correct the audio to the best acoustics for your viewing environment by using the
remote control microphone to measure a test sound from the TV. (This setting may not be
available depending on the model.)
Models that support acoustic auto calibration have the following setting.
[Settings] — [Display & Sound] — [Ambient Optimisation Pro] — [Acoustic auto calibration]