Apicturetakenwith theflashistoodark.
• If the subject is beyond the fhtsh range (the distance that the flash can
reach), the pictures will be dark because the flash light does not reach the
subject. If the ISO is changed, the flash range also changes with it
(page 86).
• In the tUllowing cases, the image may be dark. Remove these accessories,
then shoot.
An ND filter or a PL filter.
A diffuser.
A wide panel t_r the HVL-F36AM flash.
Thedateandtimearerecordedincorrectly.
• Set the correct date and time (pages 25, 125).
Theaperturevalueand/orshutterspeedflasheswhenyoupressthe
shutterbuttonhalfwaydown.
• Since the subject is too bright or too dark, it is beyond the a_.ailable range of
the camera. Adjust the setting again.
Theimageiswhitish(Flare).
Blurringof lightappearsontheimage(Ghosting).
• The picture was taken under a strong light source, and excessive light hits
entered the lens. Attach a lens hood (sold separately).
Thecornersof thepicturearetoodark.
• It" any filter or hood is used, take it off and try shooting again. Depending on
the thickness of the filter and improper attachment of the hood, the filter or
the hood may partially appear in the image. The optical properties of some
lenses may cause the periphery of the image to appear too clark (insufficient
light).
Theeyesofthesubjectcomeoutred.
• Acti_.ate the red eye reduction function (page 86).
• Get close to the subject, and shoot the subject within the flash range using
the flash (page 86).
CD
157
To Next Page
Loading...
