DotsappearandremainontheLCDmonitor.
• This is not a malfunction. These dots are not recorded (page 7).
• You may reduce the effect of these issues using the "Pixel mapping"
flmction.
@ Set the LIVE VIEW/OVF switch to "LIVE VIEW."
@ Attach the lens cap.
@ MENU button -_ % 3 -_ [Pixel mapping] -_ [OK]
Theimageisblurred.
• The picture was taken in a dark location without the flash, resulting in
camera shake. The use of a tripod or the flash is recommended (pages 47,
84).
TheEVscale< • isflashingontheLCDmonitoror intheviewfinder.
• The subject is too bright or too dark I_r the metering range of the camera.
Thecolorof an imagerecordedinLiveViewmodeis strange.
• In Live View mode, carefully check the image disphtyed on the LCD
monitor before shooting. The camera may not be able to recognize the color
of the image right after switching to the Live View mode. In such cases, the
expected result may not be obtained.
Yourcameracannotplaybackimages.
• The foMer/file name has been changed on your computer (page 137).
• When an image file has been processed by a computer or when the image
file was recorded using a model other than that of your camera, playback on
your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection (page 135).
TheimagedoesnotappearontheTVscreen.
• Check whether the connection is correct (page 114).
Yourcameracannotdeletean image.
• Cancel the protection (page 11 1).
158
To Next Page
Loading...
