Selectinga function/setting
You call select a function for shooting o1"playback from the menu list. To
display the menu list, press the control button, Fn (Function) button, o1"
MENU button.
Example: When the Fn button is pressed.
Mete_ngmode _O_m_r
Whl_ bt/,ance C_v_ S_le
From the menu list, use the control button
to move the cursor to the setting of your
choice and execute the selection.
_€_ : Press A/V/'_/I_ on the control
button to move the cursor.
O: Press the center button to execute the
selection.
[n this [nstruction Manual, the process of selecting a function with the
control button from the menu list is described as follows:
Example:Fnbutton--+ [Whitebalance]--+ Selectthedesired
setting
When you start an operation, an operation guide of control button functions
will be displayed at the bottom of the screen. Please refer to the guide when
operating the camera. The step-by-step description of the above example is
as follows:
1PresstheFnbutton.
®
4O
To Next Page
Loading...
