Adjustingthe brightnessofthe image
(Exposure,Flashcompensation,
Metering)
Except for recording mode M, the exposure is automatically selected
(Automatic exposure).
Based on the exposure acquired by the automatic exposure, you call
perform exposure compensation by shifting the exposure to either the +
side or the - side, depending on your preference. You can make the entire
image brighter by shifting to the + side. The entire image becomes darker
when you shift it to the - side.
Adjust in the - Base exposure Adjust in the +
direction direction
1Pressthe[] button.
• The exposure compensation screen is
displayed in the viewfinder mode.
[] button
2 Adjusttheexposurewiththe
controldial.
Toward + (over): Brightens an image.
Toward (under): Darkens an image.
Standard exposure
88