Using P&P Feature
This TV comes with the P&P feature which allow
you to view two pictures simultaneously. P&P
(picture and picture) provides two windows side
by side.
• The P&P feature is not available when the Parental
Lock settings are set to block programs by Rating.
When Channel Block is set, this feature can still be
used.
• Closed Caption (CC) of the main window is only
available.
P&P
Main window
window
1 Press OPTIONS to displaythe OPTIONS
menu while watching one of the following
inputs: TV channels, Video, Component or
HDML
2 Press tl,/&to highlight P&P. and press @ to
display the sub window.
Video 1/2/3
HDMI IN 112 (except PC"
tinting) Component 1/2
TV channel (VHF/UHF/
CABLE IN)
• To swap audio in P&P mode, use the I./* button to
swap the highlight between the main window and sub
window.
• 1080p signal cannot be displayed for Component 1/2
in the sub window.
Press _,/* to highlight the window to change, and
press INPUT to select the input to watch, or press
CH +/- to change channels or enter the channel
number using the 0-9 numeric buttons.
• You may also press ,JUMP to change channels.
• Inputs with Skip applied will not appear in the list of
External Inputs (see page 37 for External Inputs
settings).
1 Press OPTIONSto display the OPTIONS
menu.
2 Press tl,/_ to highlight Exit P&P, and press
@ to exit.
• You may also press RETURN while in this feature to
exit.
• Additional compatible device with television tuner is
required to watch two simultaneous live television
program.
2
25
To Next Page
Loading...
Need help?
Power
Display
Inputs and Outputs
Weight and Dimensions
