Sony BRAVIA KDL-40V3000 User Manual

Language
Info Banner
Power Saving
Light Sensor
PC Power
Management
Select the hmguage of your choice from English, Espahol and Franqais to be used for
displaying all the on-screen settings.
Displays the program name and the program information such as program title and
program rating (if available from the broadcaster) when option is set to On. Select Off for
minimal display information. Selecting Off will not completely disable the banner
display. Info Banner also appears on the screen each time the channel is changed or
DISPLAY on the remote control is pressed.
• To see the rating information on the banner, Info Banner setting must be set to On.
Reduces the power consumption by adjusting the backlight brightness. This also enhances
the black level. Select from Off, Low, High and Picture Off.
Enables the automatic picture (screen) brightness control. Light Sensor measures the
room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the anabient room light conditions.
• Be sure not to put anything around the sensor, as its function may be affected (see
page 24).
• In low light the range of the backlight control is reduced when Light Sensor is set to
On.
On Automatically enters to standby mode when there is no signal input
for more than 30 seconds. The STANDBY LED on the front panel
will illuminate when PC Power Management switches the TV to
standby mode.
Off Turns off PC Power Management.
• To bring the TV out of standby mode and recover TV features, press POWER on the
remote control.
• PC Power Management is not VESA-compliant.
If you have missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, you can run the Initial Setup. Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be affected by this Initial Setup.
• Favorites list will be cleared each time you run the Initial Setup.
38

Sony BRAVIA KDL-40V3000 Specifications

Power

power consumption in operation	260 W
power consumption in standby	Less than 0.4 W
energy star compliant	Yes

Display

screen size	40 inches
aspect ratio	16:9
display resolution	1920 x 1080p

Inputs and Outputs

analog audio input(s)	5 (1 Side /4 Rear)
audio out (variable/fixed)	1 (Rear)
component video (Y/Pb/Pr ) input(s)	2 (Rear)

Weight and Dimensions

weight with pedestal	25.0 kg
dimensions with pedestal	992 x 688 x 265 mm
dimensions without pedestal	992 x 643 x 122 mm