• When inputting VIDEO 1 to 3, ITU601 or ITU709 can be selected instead of Auto or Custom.
RGB Dynamic Range Produces natural color by changing the lmninance tone reproduction of HDMI input color
signals (RGB). Set to Auto t_r standard use. Change the settings only v,,hen the
luminance tone of the display is unnatural.
MTS Stereo For stereo reception when viewing a TV program broadcast in stereo.
Et_]o3 stereo, bilingual Auto SAP Automatically switches the TV to second audio programs when a SAP
and mono program.s signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono For mono reception. Use to reduce noise during "a,eak stereo
broadcasts.
• MTS is available only for analog programs.
Speakers TV Speakers Select to use the TV speakers for audio.
Audio System Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.
Audio Out Fixed Select to fix the audio output and allow you to adjust the volume with
Ea_s3 control qfvolume your andio system's remote controh (The TV's remote control's VOL
a(ljus'tment and MUTING buttons have no effect on Audio Out.)
Variable Select to control the Audio Out's volume and nmting with your TV's
remote control.
• Alternate Audio is available only for digital programs. If the program you are watching is also available in other
languages from the andio tracks, and if that language is what you have selected in the language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.
Cable On For receiving cable channels via cable TV provider.
Off For using an antenna.
• You should run Auto Program after changing the Cable setting.
(Continued)
33
To Next Page
Loading...
Need help?
Power
Display
Inputs and Outputs
Weight and Dimensions
