Sony CBK-RPU7 - Page 35

35
Web Menu URL screen
Displays the URL or QR code for the web menu.
To display the web menu, enter the URL in a web
browser
or scan the QR code on a computer or
smartphone that is connected to the unit. The URL
and QR code will vary depending on the
connection method.
Main screen:
Press the (Apply) button to display the
subscreen.
Subscreen:
Press the (Forward) button to sw
itch from the
LAN URL 1 screen in sequence.
•LAN URL 1
•LAN URL 2
• USB Tether (URL display)
• USB Tether (QR code display)
System screen
Main screen:
Displays the software version of the unit.
Press the (Apply) button to display the
subscreen.
Subscreen:
Use to configure option functions. Select an item
by moving the
[>] cursor using the (Forward)
button, and confirm the selection
using the
(Apply) button.
Message screen
Displays a message when a warning or caution
occurs.
For a warning, the status lamp blinks red slowly or
rapidly.
For a caution, the status lamp blinks
orange rapidly for 3 seconds.
When is displayed, press the (Apply) button
to display the next message.
Press the (Forward) button to return to the
Home screen.
If you switch to the Message screen whi
le not in
the warning or caution state, “No Message” is
displayed.
For details about caution and warning messag
es,
see “Warning/Caution System” (page 36).
Item Description
<LAN URL 1> Displays the URL of the web menu
when c
onnected via the LAN
connector using IPv6 (multicast DNS).
Note
Not displayed when [WAN] (page 29)
> [mDNS] is set to OFF on the
[Ne
twork] tab of the [Maintenance]
page in the web menu.
Item Description
<LAN URL 2> Displays the URL of the web menu
when c
onnected via the LAN
connector using IPv4.
Item Description
<USB Tether> Displays the URL of the web menu
f
or entry on a smartphone set to USB
tethering mode and connected to a
USB connector.
Note
Displayed only when a smartphone
set to USB tethering mode is
connected.
Item Description
<USB Tether> Displays the QR code of the web
menu f
or scanning on a smartphone
set to USB tethering mode and
connected to a USB connector.
Note
Displayed only when a smartphone
set to USB tethering mode is
connected.
Item Description
Back Returns to the main screen.
Reset Resets the settings of the unit to the
factory default state.
For the user name and password used to
access the web menu, see “Logging in to
the web menu” (page 14).
•
No
•Yes