22
Streaming Page
Configuration tab
This tab is used to display, create, and modify the configuration of the unit.
Up to five configurations can be configured, which
can be modified or
added to match the
application.
Tx ID (Transmitter ID) is an ID that identifies the
tra
nsmitter. This value is required when creating a
destination on a receiver. The value differs for
each device.
Configuration operations
When a configuration is selected in the list,
but
tons for the following operations are displayed
on the right side.
[Apply]: Switches to
the selected
configuration. The unit may need to be
rebooted.
[Edi
t]: Use to create or edit a configuration
using the wizard.
[Delete
]: Deletes the configuration settings.
The currently used configu
ration cannot be
deleted.
You can click the name of a configuration to
rename
it. After entry, press the Enter key to
confirm the settings.
RTT(Max) Displays the maximum value of the Round Trip Time (RTT) between
transmitter and receiver.
Item Description
Tx ID (settings required on receiver side)
Note
To Next Page