Sony CDP-3100 - Page 35

chapter 4 lili
4-2-5
Storing
a
Cue
Point
You can store up to nine cue points which are maintained until the
power is turned off or the disc compartment opened.
To store a cue point
Specify the cue point in JOG mode, then store it to one of the numeric
keys (1 to 9) by holding down the +/- STO key, then pressing the
numeric key.
To recall a stored cue point
In JOG mode, hold down the RCL key and press the numeric key
(1 to 9) of the cue point to be recalled.
To return to the previously recalled cue point
The previously recalled cue point is automatically stored to numeric
key 0. Hold down the RCL key, then press the 0 key to recall the
stored cue point.
Numeric keys
+/—- STO key RCL key
Storing a cue point
4-12 Chapter 4 Operations