Sony CDP-3100 - About this Manual; How to Use this Manual; Technical Terms

About This Manual
a a ee eee ee ee ee
How to Use This Manual
Explanations of procedures
Each procedure is accompanied by an illustration in which the step
numbers are indicated and connected by line to the respective key or
switch to be operated. Other switches or indicators that require
checking also appear in the illustration.
4-2 Searching for a Cue Point
int
Use this procedure to search for a cue point while monitoring the
audio output.
Switches, etc. used in
the procedure
Searching tor a cue point with the JOG cial
Procedure step number
Press the JOG key.
Explanation of operation
rer the track number to be searched with the numeric keys.
3 Tum the JOG dial to finely adjust the cue point while monitoring
the audio output.
4 Press the STANDBY key.
player enters STANDBY mode at the specified point
Operation results or other
operation-related information
5 Press the PLAY key.
Playback stanss from the specified cue point.
If as 2 result of monitoring you want to change the cue point,
repeat the procedure from step 1.
To play back at high speed
During monitor play mode, after checking that the SKIP indicator is
‘on, turn the JOG dial to start high-speed playback. If the SKIP
indicator is off, press the LINE QUT switch so that the LINE OUT
indicator goes off and the SKIP indicator goes on.
4-8 | chapter « Operarons
Procedure example
Technical Terms
Definitions of technical terms appearing for the first time appear at the
bottom of the respective page.
Maintenance Manual
In addition to this operation manual, the CDP-3100 comes with a
separate maintenance manual. Refer to this maintenance manual for
details on the internal electrical and electronic circuits and internal
switches.
4 About This Manual