Sony CDP-3100 - Playback Procedures

Chapter 4 HUIHIHANIL
4-14
4-3 Playback Procedures
Normal Playback Through the Control Unit
Chapter 4 Operations
2
STOP key
Normal playback through the control unit
1 After locating the cue point, press the PLAY key while in
STANDBY mode.
Monitor play starts.
2 After checking the contents of the cue point, press the STANDBY
key.
3 Press the LINE OUT switch so that it lights up.
The STANDBY indicator also lights up.
4 Press the PLAY key.
The ON LINE indicator lights up and on-line play starts.
To stop playback
Press the STOP key.