Sony CDP-3100 - Power Supply; Capacity of AC Power Supply; 1-4-2, Power Cord.Ecccccnssesccscecsnesscccnnssesseseecessnssess

1-4. POWER SUPPLY
1-4-1. Capacity of AC Power Supply
Power supply voltage:
At shipment, the power voltage is set according to where the
unit is being shipped to.
The voltage is set by connecting the primary side harness of
the power transformer to the CN163 or CN164 connector of
the AC-146 board as shown below.
Connector to be connected to the
Nines Primary Side Harness of the Power
Transformer
CN163, AC-146 board
CN164, AC-146 board
CN164, AC-146 board
220~
230V AC
220~ CN164, AC-146 board
240V AC
1-4-2. Power Cord
For J
Power cord Plug conversion
adaptor 3p-2p
1-2 (E)
Fuse Rating
(F1, AC-146 Board)
a
2A,
125V
used
is
1-423-796-11
J
Cc
240V AC CN164, AC-146 board 2A, 250V
The power fuse (F1, AC-146 board) is set according to this
setting.
Power line frequency; 50 or 60 Hz (For J, AE, UK, Ek)
50 Hz (For UC)
Power consumption; J; 30W (Unit only)
UC, AE, UK, EK; 35W (When options
are installed)
ttn] tee
Power transformer
Power transformer
used is 1-423-797-11
For UC
Power cord
For AE, UK, EK
Power cord
LIVE (BROWN)
=,
iii——
SAFETY EARTH
(GREEN/YELLOW)
NEUTRAL
(BLUE)
CDP-3 100