Sony CDP-991 - Previewing Selections with Music Scan; Auto Cue for Instant Playback

“_ OVER -” is displayed
If you continuously press B® at the end of the disc, “- OVER —” appears in
the window. Press <<@ or I@<@ to turn the normal indication.
If you continuously press <@@ at the beginning of the disc, play begins
automatically from the first selection.
When you press I¢<@ during play
The player locates the beginning of the selection.
What is an index?
This is a number assigned to a section of a selection (for example, to a
movement in a symphony) to allow that section to be located easily.
To Play a Selection Immediately fr
Beginning - Auto Cue
Auto cue lets you play right from the beginning of a given
selection without having to listen to the blank lead-in.
To use auto cue function
1 Press A. SPACE/A. CUE twice.
A SPACE/ACUE
C3
“A.CUE” will appear in the window.
2 Press If and then make your selection by
Pressing the numeric button.
em)
The time display will go out while the player is
searching for the beginning of your selection. When
the selection has been cued, the time display will
come back on. (Some selections may take longer to
find.)
3 Press > or IL
The selection wili start immediately.
To cancel auto cue function
Press the A. SPACE/A. CUE again.
“A. CUE” will disappear in the window.
Note on auto cue
Selections that fade in slowly or have noise in the lead-in may not be picked
up successfully by the auto cue function.
13