Sony CDP-991 - Navigating and Searching Tracks; Locating Specific Selections and Points

Playing a Disc - Continuous Play
A.SPACE/
A.CUE
Numeric
buttons
>20
Numeric
buttons
<<>>
(SLOW)
ibe
cating a cular Select
You can locate the beginning of a desired selection during
play or pause. There are two ways.
a) To locate sequentially
To locate the beginning of the current or preceding
selection
¢ Press Kd as many times as required.
* Keep Ik pressed to skip selections.
To locate the beginning of the succeeding selection
¢ Press PI as many times as required.
* Keep Pi pressed to skip selections.
b) To locate directly
Press one of the numeric buttons ( [1] to [20] ) to enter
the desired selection number.
If a selection number is greater than 20, use the [$20
and [1] to [10] buttons. [10] functions as the figure 0.
e.g. To play from selection No. 22, press [> 20][2][2] .
To play from selection No. 30, press [> 20][3][10] .
Locating a Particular Point in a Selection
There are two ways to locate a particular point you want.
a) To search quickly while monitoring the sound
Keep <4 or BP pressed during play and release at
the desired point.
b) To search using an index (i
You can use this function only with a disc on which
index numbers are recorded.
Press 4— or —& on the remote commander to locate
the desired index number.
The selected index number appears in the display
window.
To search quickly by observing the display
Press Il, then keep <4 or B® pressed. The search
speed will increase, but there will be no sound. Find the
desired point by observing the display.
Press If or B again at the desired point.
am)
To search slowly while monitoring the sound
Press <<4/% SLOW during play and release at the
desired point.