23
Ejecting the Disc
To eject the disc, press the eject button on the front panel. The
drawer comes out automatically.
Note:
The eject button does not work if it is disabled by:
– the software you are using
– the PREVENT/ALLOW jumper.
■ Opening the drawer manually in an emergency
You can open the drawer manually when it fails to come out by
means of the eject button or software commands. To do this, follow
the procedure below:
1 Turn off the power of your computer.
2 Insert a pointed object, such as a paper clip, into the emergency
eject hole and push.
After removing a disc from the drive unit, consult your dealer or
qualified service personnel.
Operating the Drive
Press the eject button.
Insert a pointed object to
the emargency eject
hole.
Approx. 40 mm
To Next Page
Loading...
