Getting
Started
Playable
discs
on
this
unit
This unit can play CD-DA (also containing
CD
TEXT) and CD-RlCD-RW (MP3/WMA/AAC
files (page 20»).
Type of discs
Label
on
the disc
CD-DA
cillo~@
cillo
o
§@
OIGITAL
AUDIO
DIGITAL
AUDIO
'jigS·li·SIM
IReWritablel
cillo~@
cillD~~
MP3
DIGITAL
AUDIO
DIGITAL
AUDIO
WMA
';14;·,,·$11$1
IReWritablel
AAC
cillo~@
mJO~~
'ji;;·,,·tffijmM
IReWritablel
Resetting
the
unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
_ Detach the front panel (page 7) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESETbutton will erase the clock setting
and some stored contents.
Canceling
the
DEMO
mode
You
can cancel the demonstration display which
appears during turning off.
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until "DEMO" appears.
3 Rotate the control dial to select
"DEMO-OFF."
4 Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.
6
Preparing
the
card
remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 21.
Setting
the
clock
The clock uses a
l2-hour
digital indication.
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until "CLOCK-ADJ" appears.
3 Press
(SEEK)
+.
The
hour indication flashes.
4 Rotate the control dial to set the hour
and minute.
To move the digital indication, press
(SEEK)
-/+.
5 After setting the minute, press the
select button.
The
setup
is
complete and the clock starts.
To display the clock, press
(DSPL).
Press
CQ§ED again to return to the previous display.
Tip
You
can set the clock automatically with the RDS
feature (page
13).
To Next Page
Loading...
