I
12
Tuning automatically
1 Select the band, then press
(SEEK)
-/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If
you know the frequency
of
the station you want to
listen
to,
press
and
hold
(
SEEK)
-/+
to locate the
approximate frequency, then press
(SEEK)
-/+
repeatedly to fine adjust to the desired frequency
(manual tuning).
RDS
(CDX-MR50IP)
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio program signal.
Display items
---r
---
DSD
o Radio band, Function
o
TAfTP*l
e Frequency*2 (Program service name), Preset
number, Clock, RDS data
*1 'TA" flashes during traffic information. "TP" lights
up while such a station
is received.
*2 While receiving the
RDS
station,
"*"
is displayed
on the left
of
the frequency indication.
To
change display items
e,
press
(DSPL).
RDS services
This unit automatically provides RDS services as
follows:
AF
(Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same program during a long-distance voyage
without having to retune the same station
manually.
TA
(Traffic Announcement)ITP (Traffic
Program)
Provides current traffic information/programs.
Any information/program received, will
interrupt the currently selected source.
PTY (Program Types)
Displays the currently received program type.
Also searches your selected program type.
CT
(Clock Time)
The
CT
data from the RDS transmission sets
the clock.
Notes
• Depending on the countrylregion,
not
all RDS
functions
may
be
available.
• RDS will not work
if
the signal strength is too weak,
or
if
the station you are tuned to is not transmitting
RDSdata.
Setting AF and TA
1 Press
(AFrrA)
repeatedly until the
desired setting appears.
Select
To
AF-ON
activate AF and deactivate
TA.
TA-ON
activate
TA
and deactivate
AF.
AF,
TA-ON
activate both AF and TA.
AF,
TA-OFF
deactivate both AF and TA.
Storing RDS stations with the AF and
TA
setting
You
can preset RDS stations along with the AF/
TA
setting.
If
you use the BTM function, only
RDS stations are stored with the same
AFfTA
setting.
If
you preset manually, you can preset both RDS
and non-RDS stations with the
AFfTA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
I
12
Tuning automatically
1 Select the band, then press
(SEEK)
-/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If
you know the frequency
of
the station you want to
listen
to,
press
and
hold
(
SEEK)
-/+
to locate the
approximate frequency, then press
(SEEK)
-/+
repeatedly to fine adjust to the desired frequency
(manual tuning).
RDS
(CDX-MR50IP)
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio program signal.
Display items
---r
---
DSD
o Radio band, Function
o
TAfTP*l
e Frequency*2 (Program service name), Preset
number, Clock, RDS data
*1 'TA" flashes during traffic information. "TP" lights
up while such a station
is received.
*2 While receiving the
RDS
station,
"*"
is displayed
on the left
of
the frequency indication.
To
change display items
e,
press
(DSPL).
RDS services
This unit automatically provides RDS services as
follows:
AF
(Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same program during a long-distance voyage
without having to retune the same station
manually.
TA
(Traffic Announcement)ITP (Traffic
Program)
Provides current traffic information/programs.
Any information/program received, will
interrupt the currently selected source.
PTY (Program Types)
Displays the currently received program type.
Also searches your selected program type.
CT
(Clock Time)
The
CT
data from the RDS transmission sets
the clock.
Notes
• Depending on the countryiregion,
not
all RDS
functions
may
be
available.
• RDS will not work
if
the signal strength is too weak,
or
if
the station you are tuned to is not transmitting
RDSdata.
Setting AF and TA
1 Press
(AFrrA)
repeatedly until the
desired setting appears.
Select
To
AF-ON
activate AF and deactivate
TA.
TA-ON
activate
TA
and deactivate
AF.
AF,
TA-ON
activate both AF and TA.
AF,
TA-OFF
deactivate both AF and TA.
Storing RDS stations with the AF and
TA
setting
You
can preset RDS stations along with the AF/
TA
setting.
If
you use the BTM function, only
RDS stations are stored with the same
AFfTA
setting.
If
you preset manually, you can preset both RDS
and non-RDS stations with the
AFfTA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
To Next Page
Loading...
