M.DSPl
(Motion Display)
To
select the Motion Display mode.
- "M.DSPL-SA" (e): to show moving patterns
and spectrum analyzer.
- "M.DSPL-ON": to show moving patterns.
- "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRl
(Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON" (e): to scroll.
- "A.SCRL-OFF": to not scroll.
lOCAL
(Local Seek Mode)
-
"LOCAL-ON"
: to only tune into stations with
stronger signals.
- "LOCAL-OFF" (e): to tune normal reception.
MONO*3
(Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
-
"MONO-ON"
: to hear stereo broadcast in
monaural.
- "MONO-OFF" (e): to hear stereo broadcast in
stereo.
REG*1*3
(Regional)
To set "REG-ON" (e)
or
"REG-OFF" (page 13).
lPF*4 (Low Pass Filter)
To select the subwoofer cut-offfrequency:
"LPF
OFF" (e),
"LPFI25Hz"
or
"LPF
78Hz."
lOUD
(Loudness)
To allow you to listen clearly at low volume
levels.
- "LOUD-ON" : to reinforce bass and treble.
- "LOUD-OFF" (e): to not reinforce bass and
treble.
BTM (page
11)
*1 CDX-MR50IP only
*2 When the unit
is
turned
off.
*3 When FM
is
received.
*4 When the audio output
is
set
to
"SUB."
Using
optional
equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input
jack
(stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your boat's speakers. The volume
level is adjustable for any difference between the
unit and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2
Tum
down the volume on the unit.
3 Connect to the unit.
Connecting
cord*
(not supplied)
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press
(SOURCE)
repeatedly until "AUX"
appears.
"AUX FRONT IN" appears.
3 Start playback
of
the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 15).
•
17
M.DSPl
(Motion Display)
To
select the Motion Display mode.
- "M.DSPL-SA" (e): to show moving patterns
and spectrum analyzer.
- "M.DSPL-ON": to show moving patterns.
- "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRl
(Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON" (e): to scroll.
- "A.SCRL-OFF": to not scroll.
lOCAL
(Local Seek Mode)
-
"LOCAL-ON"
: to only tune into stations with
stronger signals.
- "LOCAL-OFF" (e): to tune normal reception.
MONO*3
(Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
-
"MONO-ON"
: to hear stereo broadcast in
monaural.
- "MONO-OFF" (e): to hear stereo broadcast in
stereo.
REG*1*3
(Regional)
To set "REG-ON" (e)
or
"REG-OFF" (page 13).
lPF*4 (Low Pass Filter)
To select the subwoofer cut-offfrequency:
"LPF
OFF" (e),
"LPFI25Hz"
or
"LPF
78Hz."
lOUD
(Loudness)
To allow you to listen clearly at low volume
levels.
- "LOUD-ON" : to reinforce bass and treble.
- "LOUD-OFF" (e): to not reinforce bass and
treble.
BTM (page
11)
*1 CDX-MR50IP only
*2 When the unit
is
turned
off.
*3 When FM
is
received.
*4 When the audio output
is
set
to
"SUB."
Using
optional
equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input
jack
(stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your boat's speakers. The volume
level is adjustable for any difference between the
unit and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2
Tum
down the volume on the unit.
3 Connect to the unit.
Connecting
cord*
(not supplied)
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press
(SOURCE)
repeatedly until "AUX"
appears.
"AUX FRONT IN" appears.
3 Start playback
of
the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 15).
•
17
To Next Page
Loading...
