Sony CFD-758 - Checking and Changing Track Order

Checking and Changing Track Order
ith hecking the order of programmed
“tracks
Before playing the CD, press PGM CHECK on the remote
commander, or ENTER/MEM on the deck. With each press,
the selections appear in the programmed order.
“Changing
the
order
of
programmed
To change the order of the tracks, you must erase the
current program and create a new one. Press (stop)
once if the CD is stopped and twice if the CD is playing.
The current program will be erased.
2Chacking the remaining time _
a sd 0 - Checking the total playing time of the
Use
the
remote
commander
to
do
this.
“programmed
tracks
To
display
Press
Before
playing
the
CD,
press
DISPLAY
on
the
remote
Remaining
time
on
DISPLAY
once
commander.
the
current
track
The total playing time appears. When a pause has been
programmed, the playing time after the pause appears.
08-0705
Remaining time on the CD DISPLAY twice
and the number of tracks left*
Total playing time
Playing time and number of DISPLAY in stop mode
tracks
* If the disc has more than 16 tracks, “OVER 16” appears in the
display window, and the remaining time appears as “—:—".
Chapter 3: the CD (Compact Disc) Player |