Customizing your Sony CLIÉ™ handheld (Preferences) 75
Adding/Changing communication device
preferences
You can customize the preference for a communication device to be connected
to your CLIÉ handheld. The applications using the communication device
comply with this preference.
1 Tap the arrow V in the top right-hand corner of the
Preferences screen and select Connection.
2 Tap New.
To change the existing preference, tap the preference you want to change
and Edit.
3 Enter the connection name in Name.
Enter a logical name.
4 Tap the arrow V next to Connect to and select how you
connect your CLIÉ handheld to your computer.
5 Tap the arrow V next to Via and select what you use to
connect your CLIÉ handheld to your computer.
If you select a modem for Connect to
1 Tap the arrow
V next to Dialing and select the type of line you want
to use.
The recommend setting is TouchTone.
Do not select Rotary, except when you are sure that the telephone
service being used is not TouchTone.
2 Tap the arrow
V next to Volume and select the volume of the modem
speaker at the time of connection.
3 Tap Details.
4 Tap the arrow
V next to Speed and select the maximum speed for the
transmission between the modem and CLIÉ handheld.
5 Tap the arrow V next to Flow Ctl and select the flow control of the
modem connection.
The recommend setting is Automatic.
6 Enter the modem initialization command in the Init String.
By default, it is set to either AT&FX4 or ATZ. If the modem
initialization command is not specified on the modem, it is not required
to change.
7 Tap OK.
Continued on next page
• • • • • • • • • • • • • • • • • • •
To Next Page
Loading...
