Sony DCR-SD1000E - Step 3: Power On and Time Setting

16
GB
Step 3: Turning the power on, and setting the
date and time
1
Slide the POWER switch to ON while pressing the green button.
2
Select the desired geographical area with
/ , then touch [NEXT].
To set the date and time again, touch (MENU)  [Show others]  [CLOCK/ LANG]
(under
[GENERAL SET] category)  [CLOCK SET]. When an item is not on the screen, touch
/ until the item appears.
3
Set [SUMMERTIME], date and time, then touch
.
The clock starts.
If you set [SUMMERTIME] to [ON], the clock advances 1 hour.


Touch the button
on the LCD screen